Top Menu

3″ x.120 DOM Aluminum 54″ or less Dim X*


3″ x.120 DOM Aluminum Driveshaft   |   54″ or less Dim X *



Aluminum shafts are desired in many Hot Rod applications for appearance.   The U-joint Series choice becomes more critical over 500 HP, care must be taken to insure the correct U-joint is matched to the HP.

Aluminum shafts are built under the most Stringent Tolerances in the industry.   Tubing is Factory Straightened to .010″ total runout at the center of the tube.  Tube yokes are welded to within .006″ runout on each end.  The shafts are Electronically Computer Balanced to less than 1/8 Oz/Inch.

The most common Transmission Slip Yokes are included.  Critical speed is taken into consideration, but in most cases will not be concern on Street applications.